File: //home/posscale/backup/MT_Backups/Black_Arts/BACKUP-Home-Main-2026feb05-205226.rsc
# feb/05/2026 20:52:26 by RouterOS 6.44.1
# software id = 8CL9-FBU0
#
# model = RBD52G-5HacD2HnD
# serial number = B4A00AEE8BFF
/interface bridge
add admin-mac=74:4D:28:91:39:D8 auto-mac=no comment=defconf name=bridge
/interface ethernet
set [ find default-name=ether1 ] name=ether1-NBN-HFC
set [ find default-name=ether2 ] name="ether2-Office LAN"
set [ find default-name=ether3 ] name="ether3-Home Foxtel EOP"
/interface vlan
add interface=ether1-NBN-HFC name=NBN-100 vlan-id=100
/interface list
add comment=defconf name=WAN
add comment=defconf name=LAN
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
add authentication-types=wpa-psk,wpa2-psk management-protection=allowed mode=\
dynamic-keys name=home-pwd supplicant-identity=MikroTik \
wpa-pre-shared-key=Stryder32 wpa2-pre-shared-key=Stryder32
/interface wireless
set [ find default-name=wlan1 ] band=2ghz-b/g/n channel-width=20/40mhz-XX \
disabled=no distance=indoors frequency=auto mode=ap-bridge \
security-profile=home-pwd ssid=HomeWiFi wireless-protocol=802.11
set [ find default-name=wlan2 ] band=5ghz-a/n/ac channel-width=\
20/40/80mhz-XXXX disabled=no distance=indoors frequency=auto mode=\
ap-bridge security-profile=home-pwd ssid=Home-WiFi-5G wireless-protocol=\
802.11
/ip hotspot profile
set [ find default=yes ] html-directory=flash/hotspot
/ip pool
add name=default-dhcp ranges=192.168.88.10-192.168.88.254
add name="office Pool" ranges=192.168.10.10-192.168.10.100
/ip dhcp-server
add address-pool=default-dhcp disabled=no interface=bridge name=defconf
add address-pool="office Pool" disabled=no interface="ether2-Office LAN" \
name=Office-DHCP
/interface bridge port
add bridge=bridge comment=defconf interface="ether3-Home Foxtel EOP"
add bridge=bridge comment=defconf interface=ether4
add bridge=bridge comment=defconf interface=ether5
add bridge=bridge comment=defconf interface=wlan1
add bridge=bridge comment=defconf interface=wlan2
/ip neighbor discovery-settings
set discover-interface-list=LAN
/ip settings
set tcp-syncookies=yes
/interface detect-internet
set detect-interface-list=all
/interface list member
add comment=defconf interface=bridge list=LAN
add comment=defconf interface=ether1-NBN-HFC list=WAN
add interface=NBN-100 list=WAN
add interface="ether2-Office LAN" list=LAN
/ip address
add address=192.168.88.1/24 comment=defconf interface=bridge network=\
192.168.88.0
add address=14.203.172.34/30 interface=ether1-NBN-HFC network=14.203.172.32
add address=192.168.10.1/24 interface="ether2-Office LAN" network=\
192.168.10.0
/ip dhcp-client
add comment=defconf dhcp-options=hostname,clientid disabled=no interface=\
ether1-NBN-HFC
/ip dhcp-server lease
add address=192.168.10.12 client-id=1:74:4d:28:91:39:96 mac-address=\
74:4D:28:91:39:96 server=Office-DHCP
/ip dhcp-server network
add address=192.168.10.0/24 comment="Black Arts - Office Network" gateway=\
192.168.10.1 netmask=24
add address=192.168.88.0/24 comment=defconf gateway=192.168.88.1
/ip dns
set allow-remote-requests=yes servers=203.8.183.1,192.189.54.33,192.168.88.1
/ip dns static
add address=192.168.88.1 name=router.lan
/ip firewall address-list
add address=61.69.57.74 comment="To allow access to router" list=support
add address=0.0.0.0/8 comment="Self-Identification [RFC 3330]" list=bogons
add address=10.0.0.0/8 comment=\
"Private[RFC 1918] - CLASS A # Check if you need this" disabled=yes list=\
bogons
add address=127.0.0.0/16 comment="Loopback [RFC 3330]" list=bogons
add address=169.254.0.0/16 comment="Link Local [RFC 3330]" list=bogons
add address=172.16.0.0/12 comment=\
"Private[RFC 1918] - CLASS B # Check if you need this" disabled=yes list=\
bogons
add address=192.168.0.0/16 comment=\
"Private[RFC 1918] - CLASS C # Check if you need this" disabled=yes list=\
bogons
add address=192.0.2.0/24 comment="Reserved - IANA - TestNet1" list=bogons
add address=192.88.99.0/24 comment="6to4 Relay Anycast [RFC 3068]" list=\
bogons
add address=198.18.0.0/15 comment="NIDB Testing" list=bogons
add address=198.51.100.0/24 comment="Reserved - IANA - TestNet2" list=bogons
add address=203.0.113.0/24 comment="Reserved - IANA - TestNet3" list=bogons
add address=224.0.0.0/4 comment="MC, Class D, IANA # Check if you need this" \
disabled=yes list=bogons
/ip firewall filter
add action=drop chain=input dst-port=53 in-interface=NBN-100 protocol=tcp
add action=drop chain=input dst-port=53 in-interface=NBN-100 protocol=udp
add action=accept chain=input comment=\
"defconf: accept established,related,untracked" connection-state=\
established,related,untracked disabled=yes
add action=drop chain=forward disabled=yes src-address=10.1.4.11
add action=drop chain=forward disabled=yes dst-address=10.1.4.11
add action=drop chain=forward disabled=yes src-address=162.125.83.14
add action=drop chain=input comment="defconf: drop invalid" connection-state=\
invalid disabled=yes
add action=accept chain=input comment="defconf: accept ICMP" disabled=yes \
protocol=icmp
add action=drop chain=input comment="defconf: drop all not coming from LAN" \
disabled=yes in-interface-list=!LAN
add action=accept chain=forward comment="defconf: accept in ipsec policy" \
disabled=yes ipsec-policy=in,ipsec
add action=accept chain=forward comment="defconf: accept out ipsec policy" \
disabled=yes ipsec-policy=out,ipsec
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" \
connection-state=established,related disabled=yes
add action=accept chain=forward comment=\
"defconf: accept established,related, untracked" connection-state=\
established,related,untracked disabled=yes
add action=drop chain=forward comment="defconf: drop invalid" \
connection-state=invalid disabled=yes
add action=drop chain=forward comment=\
"defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat \
connection-state=new disabled=yes in-interface-list=WAN
add action=accept chain=input comment=\
"Accept established and related connections" connection-state=\
established,related
add action=accept chain=input src-address-list=""
add action=drop chain=input in-interface=NBN-100 protocol=!icmp
add action=drop chain=forward,input connection-state=invalid
add action=drop chain=input comment="Block access from http" in-interface=\
NBN-100 port=80 protocol=tcp
add action=add-src-to-address-list address-list=Syn_Flooder \
address-list-timeout=30m chain=input comment=\
"Add Syn Flood IP to the list" connection-limit=30,32 protocol=tcp \
tcp-flags=syn
add action=drop chain=forward,input comment="Drop syn flood list" \
src-address-list=Syn_Flooder
add action=add-src-to-address-list address-list=Port_Scanner \
address-list-timeout=1w chain=input comment="Port Scanner Detect" \
protocol=tcp psd=21,3s,3,1
add action=drop chain=input comment="Drop port scan list" src-address-list=\
Port_Scanner
add action=jump chain=input comment="Jump for icmp input flow" jump-target=\
ICMP protocol=icmp
add action=drop chain=input comment="Block all access to the winbox - except t\
o support list # DO NOT ENABLE BEFORE ADDING YOUR SUBNET TO SUPPORT ADDRES\
S LIST #" dst-port=8291 in-interface-list=WAN protocol=tcp \
src-address-list=!support
add action=jump chain=forward comment="Jump for icmp forward flow" \
jump-target=ICMP protocol=icmp
add action=drop chain=forward comment="Drop to bogon list" dst-address-list=\
Bogons
add action=add-src-to-address-list address-list=Spammers \
address-list-timeout=3h chain=forward comment=\
"Add Spammers to the list for 3 hours" connection-limit=30,32 dst-port=\
25,587 limit=30/1m,0:packet protocol=tcp
add action=drop chain=forward comment="Avoid spammers action" dst-port=25,587 \
protocol=tcp src-address-list=Spammers
add action=add-src-to-address-list address-list=ftp_Brute \
address-list-timeout=3h chain=input comment=\
"Add bruteforcers to list for 3 hours" connection-limit=30,32 content=\
"530 Login incorrect" dst-port=21 limit=10/1m,0:packet protocol=tcp
add action=tarpit chain=forward comment="Tarpit login bruteforce" dst-port=25 \
protocol=tcp src-address-list=smtp_Brute
add action=drop chain=input comment="Drop ftp bruteforce" dst-port=21 \
protocol=tcp src-address-list=ftp_Brute
add action=drop chain=input comment="Drop DNS - UDP" in-interface=NBN-100 \
port=53 protocol=udp
add action=drop chain=input comment="Drop DNS - TCP" in-interface=NBN-100 \
port=53 protocol=tcp
add action=accept chain=input comment="Full access to SUPPORT address list" \
src-address-list=support
add action=drop chain=input comment="Drop anything else! # DO NOT ENABLE THIS \
RULE BEFORE YOU MAKE SURE ABOUT ALL ACCEPT RULES YOU NEED"
add action=accept chain=ICMP comment="Echo request - Avoiding Ping Flood" \
icmp-options=8:0 limit=1,5:packet protocol=icmp
add action=accept chain=ICMP comment="Echo reply" icmp-options=0:0 protocol=\
icmp
add action=accept chain=ICMP comment="Time Exceeded" icmp-options=11:0 \
protocol=icmp
add action=accept chain=ICMP comment="Destination unreachable" icmp-options=\
3:0-1 protocol=icmp
add action=accept chain=ICMP comment=PMTUD icmp-options=3:4 protocol=icmp
add action=drop chain=ICMP comment="Drop to the other ICMPs" protocol=icmp
add action=jump chain=output comment="Jump for icmp output" jump-target=ICMP \
protocol=icmp
/ip firewall mangle
add action=add-dst-to-address-list address-list=smtp_Brute \
address-list-timeout=10m chain=forward comment=\
"Add excessive login failures to list for 10 minutes" connection-state=\
established content=\
"535 5.7.8 Error: authentication failed: authentication failure" limit=\
!3/1m,3:packet protocol=tcp src-port=25
/ip firewall nat
add action=masquerade chain=srcnat comment="defconf: masquerade" \
ipsec-policy=out,none out-interface-list=WAN
add action=dst-nat chain=dstnat comment=Hacked disabled=yes dst-port=548 \
in-interface-list=WAN protocol=tcp to-addresses=10.1.4.11 to-ports=548
add action=dst-nat chain=dstnat disabled=yes dst-port=5090 in-interface-list=\
WAN protocol=tcp to-addresses=192.168.10.10
add action=dst-nat chain=dstnat dst-port=8292 in-interface-list=WAN protocol=\
tcp src-address-list=support to-addresses=192.168.10.12 to-ports=8291
add action=dst-nat chain=dstnat dst-port=80 in-interface=NBN-100 protocol=tcp \
src-address-list=support to-addresses=192.168.88.246 to-ports=80
add action=dst-nat chain=dstnat disabled=yes dst-port=5950 in-interface=\
NBN-100 protocol=tcp to-addresses=192.168.10.12
/ip firewall service-port
set sip disabled=yes
/ip route
add distance=1 gateway=14.203.172.33
add distance=1 dst-address=10.1.4.0/24 gateway=192.168.10.12
/ip service
set telnet disabled=yes
set ftp disabled=yes
set www disabled=yes
set ssh disabled=yes
set api disabled=yes
set api-ssl disabled=yes
/system clock
set time-zone-name=Australia/Brisbane
/system identity
set name=Home-Main
/system scheduler
add interval=1w name=autobackup on-event=":local saveUserDB false\r\
\n:local saveSysBackup true\r\
\n:local encryptSysBackup false\r\
\n:local saveRawExport true\r\
\n\r\
\n:local FTPServer \"backup.posscales.com.au\"\r\
\n:local FTPPort 21\r\
\n:local FTPUser \"MT_Backups@backup.posscales.com.au\"\r\
\n:local FTPPass \"!Dgt.974082\"\r\
\n:local FTPdest \"/Black_Arts\"\r\
\n\r\
\n:local ts [/system clock get time]\r\
\n:set ts ([:pick \$ts 0 2].[:pick \$ts 3 5].[:pick \$ts 6 8])\r\
\n:local ds [/system clock get date]\r\
\n:set ds ([:pick \$ds 7 11].[:pick \$ds 0 3].[:pick \$ds 4 6])\r\
\n\r\
\n:local fname (\"BACKUP-\".[/system identity get name].\"-\".\$ds.\"-\".\
\$ts)\r\
\n:local sfname (\"/\".\$fname)\r\
\n:if (\$saveUserDB) do={\r\
\n /tool user-manager database save name=(\$sfname.\".umb\")\r\
\n :log info message=\"User Manager DB Backup Finished\"\r\
\n}\r\
\n:if (\$saveSysBackup) do={\r\
\n :if (\$encryptSysBackup = true) do={ /system backup save name=(\$sfnam\
e.\".backup\") }\r\
\n :if (\$encryptSysBackup = false) do={ /system backup save dont-encrypt\
=yes name=(\$sfname.\".backup\") }\r\
\n :log info message=\"System Backup Finished\"\r\
\n}\r\
\nif (\$saveRawExport) do={\r\
\n /export file=(\$sfname.\".rsc\")\r\
\n :log info message=\"Raw configuration script export Finished\"\r\
\n}\r\
\n:local backupFileName \"\"\r\
\n:local backupDestPath \"\"\r\
\n:foreach backupFile in=[/file find] do={\r\
\n :set backupFileName (\"/\".[/file get \$backupFile name])\r\
\n :set backupDestPath (\$FTPdest.\$backupFileName)\r\
\n :if ([:typeof [:find \$backupFileName \$sfname]] != \"nil\") do={\r\
\n # :log warning message=\"/tool fetch address=\$FTPServer port=\$FTPPor\
t src-path=\$backupFileName user=\$FTPUser mode=ftp password=\$FTPPass dst\
-path=\$backupDestPath upload=yes\"\r\
\n\r\
\n /tool fetch address=\$FTPServer port=\$FTPPort src-path=\$backupFile\
Name user=\$FTPUser mode=ftp password=\$FTPPass dst-path=\$backupDestPath \
upload=yes\r\
\n }\r\
\n}\r\
\n:delay 5s\r\
\n:foreach backupFile in=[/file find] do={\r\
\n :if ([:typeof [:find [/file get \$backupFile name] \"BACKUP-\"]]!=\"ni\
l\") do={\r\
\n /file remove \$backupFile\r\
\n }\r\
\n}\r\
\n\r\
\n:log info message=\"Successfully removed Temporary Backup Files\"\r\
\n:log info message=\"Automatic Backup Completed Successfully\"" policy=\
ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon \
start-date=aug/05/2021 start-time=20:52:26
/system script
add dont-require-permissions=no name="Manual BAckup" owner=admin policy=\
ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source=":\
local saveUserDB false\r\
\n:local saveSysBackup true\r\
\n:local encryptSysBackup false\r\
\n:local saveRawExport true\r\
\n\r\
\n:local FTPServer \"backup.posscales.com.au\"\r\
\n:local FTPPort 21\r\
\n:local FTPUser \"MT_Backups@backup.posscales.com.au\"\r\
\n:local FTPPass \"!Dgt.974082\"\r\
\n:local FTPdest \"/Black_Arts\"\r\
\n\r\
\n:local ts [/system clock get time]\r\
\n:set ts ([:pick \$ts 0 2].[:pick \$ts 3 5].[:pick \$ts 6 8])\r\
\n:local ds [/system clock get date]\r\
\n:set ds ([:pick \$ds 7 11].[:pick \$ds 0 3].[:pick \$ds 4 6])\r\
\n\r\
\n:local fname (\"BACKUP-\".[/system identity get name].\"-\".\$ds.\"-\".\
\$ts)\r\
\n:local sfname (\"/\".\$fname)\r\
\n:if (\$saveUserDB) do={\r\
\n /tool user-manager database save name=(\$sfname.\".umb\")\r\
\n :log info message=\"User Manager DB Backup Finished\"\r\
\n}\r\
\n:if (\$saveSysBackup) do={\r\
\n :if (\$encryptSysBackup = true) do={ /system backup save name=(\$sfnam\
e.\".backup\") }\r\
\n :if (\$encryptSysBackup = false) do={ /system backup save dont-encrypt\
=yes name=(\$sfname.\".backup\") }\r\
\n :log info message=\"System Backup Finished\"\r\
\n}\r\
\nif (\$saveRawExport) do={\r\
\n /export file=(\$sfname.\".rsc\")\r\
\n :log info message=\"Raw configuration script export Finished\"\r\
\n}\r\
\n:local backupFileName \"\"\r\
\n:local backupDestPath \"\"\r\
\n:foreach backupFile in=[/file find] do={\r\
\n :set backupFileName (\"/\".[/file get \$backupFile name])\r\
\n :set backupDestPath (\$FTPdest.\$backupFileName)\r\
\n :if ([:typeof [:find \$backupFileName \$sfname]] != \"nil\") do={\r\
\n # :log warning message=\"/tool fetch address=\$FTPServer port=\$FTPPor\
t src-path=\$backupFileName user=\$FTPUser mode=ftp password=\$FTPPass dst\
-path=\$backupDestPath upload=yes\"\r\
\n\r\
\n /tool fetch address=\$FTPServer port=\$FTPPort src-path=\$backupFile\
Name user=\$FTPUser mode=ftp password=\$FTPPass dst-path=\$backupDestPath \
upload=yes\r\
\n }\r\
\n}\r\
\n:delay 5s\r\
\n:foreach backupFile in=[/file find] do={\r\
\n :if ([:typeof [:find [/file get \$backupFile name] \"BACKUP-\"]]!=\"ni\
l\") do={\r\
\n /file remove \$backupFile\r\
\n }\r\
\n}\r\
\n\r\
\n:log info message=\"Successfully removed Temporary Backup Files\"\r\
\n:log info message=\"Automatic Backup Completed Successfully\""
add dont-require-permissions=no name="backup 2" owner=admin policy=\
ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source=":\
local saveUserDB false\r\
\n:local saveSysBackup true\r\
\n:local encryptSysBackup false\r\
\n:local saveRawExport true\r\
\n\r\
\n:local FTPServer \"backup.posscales.com.au\"\r\
\n:local FTPPort 21\r\
\n:local FTPUser \"MT_Backups@backup.posscales.com.au\"\r\
\n:local FTPPass \"!Dgt.974082\"\r\
\n:local FTPdest \"/POS_Scales\"\r\
\n\r\
\n:local ts [/system clock get time]\r\
\n:set ts ([:pick \$ts 0 2].[:pick \$ts 3 5].[:pick \$ts 6 8])\r\
\n:local ds [/system clock get date]\r\
\n:set ds ([:pick \$ds 7 11].[:pick \$ds 0 3].[:pick \$ds 4 6])\r\
\n\r\
\n:local fname (\"BACKUP-\".[/system identity get name].\"-\".\$ds.\"-\".\
\$ts)\r\
\n:local sfname (\"/\".\$fname)\r\
\n:if (\$saveUserDB) do={\r\
\n /tool user-manager database save name=(\$sfname.\".umb\")\r\
\n :log info message=\"User Manager DB Backup Finished\"\r\
\n}\r\
\n:if (\$saveSysBackup) do={\r\
\n :if (\$encryptSysBackup = true) do={ /system backup save name=(\$sfnam\
e.\".backup\") }\r\
\n :if (\$encryptSysBackup = false) do={ /system backup save dont-encrypt\
=yes name=(\$sfname.\".backup\") }\r\
\n :log info message=\"System Backup Finished\"\r\
\n}\r\
\nif (\$saveRawExport) do={\r\
\n /export file=(\$sfname.\".rsc\")\r\
\n :log info message=\"Raw configuration script export Finished\"\r\
\n}\r\
\n:local backupFileName \"\"\r\
\n:local backupDestPath \"\"\r\
\n:foreach backupFile in=[/file find] do={\r\
\n :set backupFileName (\"/\".[/file get \$backupFile name])\r\
\n :set backupDestPath (\$FTPdest.\$backupFileName)\r\
\n :if ([:typeof [:find \$backupFileName \$sfname]] != \"nil\") do={\r\
\n :log warning message=\"/tool fetch address=\$FTPServer port=\$FTPPort \
src-path=\$backupFileName user=\$FTPUser mode=ftp password=\$FTPPass dst-p\
ath=\$backupDestPath upload=yes\"\r\
\n\r\
\n /tool fetch address=\$FTPServer port=\$FTPPort src-path=\$backupFile\
Name user=\$FTPUser mode=ftp password=\$FTPPass dst-path=\$backupDestPath \
upload=yes\r\
\n }\r\
\n}\r\
\n:delay 5s\r\
\n:foreach backupFile in=[/file find] do={\r\
\n :if ([:typeof [:find [/file get \$backupFile name] \"BACKUP-\"]]!=\"ni\
l\") do={\r\
\n /file remove \$backupFile\r\
\n }\r\
\n}\r\
\n\r\
\n:log info message=\"Successfully removed Temporary Backup Files\"\r\
\n:log info message=\"Automatic Backup Completed Successfully\""
/tool mac-server
set allowed-interface-list=LAN
/tool mac-server mac-winbox
set allowed-interface-list=LAN
/tool romon
set enabled=yes