# dec/17/2024 18:21:01 by RouterOS 6.47.8
# software id = 97MT-VWD7
#
# model = RBD52G-5HacD2HnD
# serial number = C6140C8AB8E4
/interface wireless
set [ find default-name=wlan1 ] band=2ghz-g/n channel-width=20/40mhz-XX \
    disabled=no distance=indoors frequency=auto installation=indoor mode=\
    ap-bridge ssid=SmartAir station-roaming=enabled wireless-protocol=802.11
set [ find default-name=wlan2 ] band=5ghz-n/ac channel-width=20/40/80mhz-XXXX \
    disabled=no distance=indoors frequency=auto installation=indoor mode=\
    ap-bridge ssid=SmartAir-5G station-roaming=enabled wireless-protocol=\
    802.11
/interface bridge
add admin-mac=48:8F:5A:EF:C4:E0 auto-mac=no comment=defconf name=bridge
/interface ethernet
set [ find default-name=ether1 ] comment=NBN
/interface vlan
add interface=ether1 name=NBN-100 vlan-id=100
/interface list
add comment=defconf name=WAN
add comment=defconf name=LAN
/interface wireless security-profiles
set [ find default=yes ] authentication-types=wpa2-psk comment=1800572689 \
    eap-methods="" mode=dynamic-keys supplicant-identity=MikroTik \
    wpa2-pre-shared-key=1800572689
/ip hotspot profile
set [ find default=yes ] html-directory=flash/hotspot
/ip pool
add name=default-dhcp ranges=192.168.2.100-192.168.2.200
/ip dhcp-server
add address-pool=default-dhcp disabled=no interface=bridge name=defconf
/user group
set full policy="local,telnet,ssh,ftp,reboot,read,write,policy,test,winbox,pas\
    sword,web,sniff,sensitive,api,romon,dude,tikapp"
/interface bridge port
add bridge=bridge comment=defconf interface=ether2
add bridge=bridge comment=defconf interface=ether3
add bridge=bridge comment=defconf interface=ether4
add bridge=bridge comment=defconf interface=ether5
add bridge=bridge comment=defconf interface=wlan1
add bridge=bridge comment=defconf interface=wlan2
/ip neighbor discovery-settings
set discover-interface-list=LAN
/interface list member
add comment=defconf interface=bridge list=LAN
add comment=defconf interface=ether1 list=WAN
add interface=NBN-100 list=WAN
/ip address
add address=192.168.2.1/24 comment=defconf interface=bridge network=\
    192.168.2.0
add address=60.241.232.178/30 interface=NBN-100 network=60.241.232.176
/ip dhcp-client
add comment=defconf interface=bridge
/ip dhcp-server network
add address=192.168.2.0/24 comment=defconf dns-server=192.168.2.1 gateway=\
    192.168.2.1
/ip dns
set allow-remote-requests=yes servers=8.8.8.8
/ip dns static
add address=192.168.88.1 comment=defconf disabled=yes name=router.lan
add address=3.105.22.41 name=unifi
/ip firewall address-list
add address=61.69.57.74 list=Managemant
/ip firewall filter
add action=drop chain=input dst-port=53 in-interface-list=WAN protocol=tcp
add action=drop chain=input dst-port=53 in-interface-list=WAN protocol=udp
add action=accept chain=input dst-port=8291 in-interface-list=WAN protocol=\
    tcp src-address-list=Managemant
add action=accept chain=input comment=\
    "defconf: accept established,related,untracked" connection-state=\
    established,related,untracked
add action=drop chain=input comment="defconf: drop invalid" connection-state=\
    invalid in-interface-list=WAN
add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp
add action=accept chain=input comment=\
    "defconf: accept to local loopback (for CAPsMAN)" dst-address=127.0.0.1
add action=drop chain=input comment="defconf: drop all not coming from LAN" \
    in-interface-list=!LAN
add action=accept chain=forward comment="defconf: accept in ipsec policy" \
    ipsec-policy=in,ipsec
add action=accept chain=forward comment="defconf: accept out ipsec policy" \
    ipsec-policy=out,ipsec
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" \
    connection-state=established,related
add action=accept chain=forward comment=\
    "defconf: accept established,related, untracked" connection-state=\
    established,related,untracked
add action=drop chain=forward comment="defconf: drop invalid" \
    connection-state=invalid in-interface-list=WAN
add action=drop chain=forward comment=\
    "defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat \
    connection-state=new in-interface-list=WAN
/ip firewall nat
add action=masquerade chain=srcnat comment="defconf: masquerade" \
    ipsec-policy=out,none out-interface-list=WAN
/ip firewall service-port
set sip disabled=yes
/ip route
add distance=1 gateway=60.241.232.177
/ip service
set ftp disabled=yes
set www disabled=yes
set api disabled=yes
set api-ssl disabled=yes
/system clock
set time-zone-autodetect=no time-zone-name=Australia/Sydney
/system identity
set name="Smart Air - Milperra"
/system routerboard settings
set reformat-hold-button=1m reformat-hold-button-max=1m10s
/system scheduler
add interval=1w name="Auto FTP Backup" on-event=":local saveUserDB false\r\
    \n:local saveSysBackup true\r\
    \n:local encryptSysBackup false\r\
    \n:local saveRawExport true\r\
    \n\r\
    \n:local FTPServer \"backup.posscales.com.au\"\r\
    \n:local FTPPort 21\r\
    \n:local FTPUser \"MT_Backups@backup.posscales.com.au\"\r\
    \n:local FTPPass \"!Dgt.974082\"\r\
    \n:local FTPdest \"/Smartair/Milpera\"\r\
    \n\r\
    \n:local ts [/system clock get time]\r\
    \n:set ts ([:pick \$ts 0 2].[:pick \$ts 3 5].[:pick \$ts 6 8])\r\
    \n:local ds [/system clock get date]\r\
    \n:set ds ([:pick \$ds 7 11].[:pick \$ds 0 3].[:pick \$ds 4 6])\r\
    \n\r\
    \n:local fname (\"BACKUP-\".[/system identity get name].\"-\".\$ds.\"-\".\
    \$ts)\r\
    \n:local sfname (\"/\".\$fname)\r\
    \n:if (\$saveUserDB) do={\r\
    \n  /tool user-manager database save name=(\$sfname.\".umb\")\r\
    \n  :log info message=\"User Manager DB Backup Finished\"\r\
    \n}\r\
    \n:if (\$saveSysBackup) do={\r\
    \n  :if (\$encryptSysBackup = true) do={ /system backup save name=(\$sfnam\
    e.\".backup\") }\r\
    \n  :if (\$encryptSysBackup = false) do={ /system backup save dont-encrypt\
    =yes name=(\$sfname.\".backup\") }\r\
    \n  :log info message=\"System Backup Finished\"\r\
    \n}\r\
    \nif (\$saveRawExport) do={\r\
    \n  /export file=(\$sfname.\".rsc\")\r\
    \n  :log info message=\"Raw configuration script export Finished\"\r\
    \n}\r\
    \n:delay 10s\r\
    \n:local backupFileName \"\"\r\
    \n:local backupDestPath \"\"\r\
    \n:foreach backupFile in=[/file find] do={\r\
    \n  :set backupFileName (\"/\".[/file get \$backupFile name])\r\
    \n  :set backupDestPath (\$FTPdest.\$backupFileName)\r\
    \n  :if ([:typeof [:find \$backupFileName \$sfname]] != \"nil\") do={\r\
    \n  # :log warning message=\"/tool fetch address=\$FTPServer port=\$FTPPor\
    t src-path=\$backupFileName user=\$FTPUser mode=ftp password=\$FTPPass dst\
    -path=\$backupDestPath upload=yes\"\r\
    \n\r\
    \n    /tool fetch address=\$FTPServer port=\$FTPPort src-path=\$backupFile\
    Name user=\$FTPUser mode=ftp password=\$FTPPass dst-path=\$backupDestPath \
    upload=yes\r\
    \n  }\r\
    \n}\r\
    \n:delay 10s\r\
    \n:foreach backupFile in=[/file find] do={\r\
    \n  :if ([:typeof [:find [/file get \$backupFile name] \"BACKUP-\"]]!=\"ni\
    l\") do={\r\
    \n    /file remove \$backupFile\r\
    \n  }\r\
    \n}\r\
    \n\r\
    \n:log info message=\"Successfully removed Temporary Backup Files\"\r\
    \n:log info message=\"Automatic Backup Completed Successfully\"" policy=\
    ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon \
    start-date=jan/11/2022 start-time=18:21:00
/tool mac-server
set allowed-interface-list=LAN
/tool mac-server mac-winbox
set allowed-interface-list=LAN